Kayak Fishing Adventures on Big Water’s Edge

Kayak Fishing Adventures on Big Water’s Edge (http://www.bigwatersedge.com/bwevb/index.php)
-   General Kayak Fishing Discussion (http://www.bigwatersedge.com/bwevb/forumdisplay.php?f=11)
-   -   Fishing Pliers: What do you like? (http://www.bigwatersedge.com/bwevb/showthread.php?t=21203)

buddha 03-11-2014 11:56 AM

Fishing Pliers: What do you like?
 
I have some needle nose pliers, a cheap braid cutter, but I need a little stronger pair of pliers. Some like the Adaro P Line pliers. I have seen the Boomerang pliers online but have no experience with them. Some say Sargent are great.

What do you like and why?

momo fish 03-11-2014 12:04 PM

Also looking for a good pair. Seems ones I buy get all rusty at end of season even after I wash them and apply oil every few months.


Sent from my iPhone using Tapatalk

bolocop 03-11-2014 12:24 PM

won't rust
 
I'm not sure if this isn't powerful enough for you, but a buddy and I both got this because of it's durability. This won't rust. I haven't even rinsed with fresh water.

It's also relatively inexpensive...titanium/aluminum alloy

http://www.amazon.com/ForEverlast-G2...fishing+pliers

jorluivil 03-11-2014 12:50 PM

My suggestion: try them out at a shop before you buy them online. I had a chance to hold two different brands that looked very similar but the handles on brand X were slightly wider than the handle on brand Y. Although the difference in width wasn't noticeable it made a huge difference when you actually held it in your hand.

chxh8me 03-11-2014 01:38 PM

Turners often has the P-Line Adaro Jr's on sale for $20, which come with lanyard and pouch.... but I guess that doesnt really help those without a Turners nearby.

I keep one for kayak/surf fishing, and one for boat fishing. I like them a lot more than my regular P-line pliers (which are really just cheap, re-branded pliers you can get at any hardware store) and Cabelas pliers I have, which are constantly rusting. The braid cutter on the Adaro works really well, and stays sharp... but the location of the cutter can be awkward at times.

bus kid 03-11-2014 01:48 PM

stainless...
 
pliers

http://www.fleetfarm.com/detail/Bake...FcWTfgodi0EA8g

cutters
http://www.cmlsupply.com/electronics...-10355-er.html

roby 03-11-2014 06:57 PM

I have the ForEverlast Pliers and they hold up to kayak use very well. I've had them for almost a year and no rust yet.

The pliers themselves are not tough though. When I bend down barbs or hooks, the grooves in the pliers began to "eat away." The braid cutter is getting dull and I should replace it soon.

Overall, I like these set of pliers.

I have used the Boomerang Pliers as well (link below). These did not handle normal kayak use at all and I had to trash them in about 6 months.

http://www.amazon.com/Boomerang-Tool...omerang+pliers

The Newer Boomerang Pliers look decent, but I've never tried them.

http://www.amazon.com/Boomerang-BTC2...omerang+pliers

boxturtle 03-11-2014 07:04 PM

Quote:

Originally Posted by jorluivil (Post 185708)
My suggestion: try them out at a shop before you buy them online. I had a chance to hold two different brands that looked very similar but the handles on brand X were slightly wider than the handle on brand Y. Although the difference in width wasn't noticeable it made a huge difference when you actually held it in your hand.

Wished my old man gave me that advice on my first wife

momo fish 03-11-2014 07:12 PM

Now that's funny !!!!!!


Sent from my iPhone using Tapatalk

Fishwhisperer619 03-11-2014 07:13 PM

X2


All times are GMT -8. The time now is 07:51 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
© 2002 Big Water's Edge. All rights reserved.