Kayak Fishing Adventures on Big Water’s Edge

Kayak Fishing Adventures on Big Water’s Edge (http://www.bigwatersedge.com/bwevb/index.php)
-   General Kayak Fishing Discussion (http://www.bigwatersedge.com/bwevb/forumdisplay.php?f=11)
-   -   Sabiki stick chop chop (http://www.bigwatersedge.com/bwevb/showthread.php?t=7348)

semiwrecker 05-14-2010 10:44 PM

Sabiki stick chop chop
 
got a new sabiki stick used it the other day and it seems too long 8'3"... where do i get this thing choppeddown at? i am in the san diego area..

Dan 05-14-2010 10:48 PM

sabiki jig stick, that's HOT! :D

semiwrecker 05-14-2010 11:17 PM

serious man thats what its like...

Hunters Pa 05-15-2010 07:08 AM

Andy????? I think you just trim it down where it assembles at the hyphalon foam, trim it & either goop or epoxy.

danny 05-15-2010 08:23 AM

always low prices.
 
I use a pole from walmart it was 4 bucks on sale with a spinning real that was 10 bucks. Does the trick for me. What is the advantage of a the fancy stuff ?

old_rookie 05-15-2010 08:44 AM

I have some tall bamboo in the backyard - I plan on cutting a piece, letting it dry in the sun and tie a line at the end - that will be my jig stick.

stairman 05-15-2010 08:46 AM

fancy stuff!
 
You get to buy something you will use for nothing else and then reel the sabiki into the rod will it will sit and rust out the hooks so next time you break of all the bait you hook!

semiwrecker 05-15-2010 09:37 AM

by all means this thing was not fancy... 30 bucks..

trob 05-15-2010 10:51 AM

OEX cuts down all the Ahi sabiki sticks they sell. Im sure any of the kayak fishing specific shops will cut one for you (Mission Bay, Kearny Mesa, O'side, Sunset Beach).

semiwrecker 05-15-2010 11:38 AM

Quote:

Originally Posted by trob (Post 56973)
OEX cuts down all the Ahi sabiki sticks they sell. Im sure any of the kayak fishing specific shops will cut one for you (Mission Bay, Kearny Mesa, O'side, Sunset Beach).

awesome ill givem a ring thankya sir:luxhello:

Iceman 05-17-2010 09:27 AM

Quote:

Andy????? I think you just trim it down where it assembles at the hyphalon foam, trim it & either goop or epoxy.
take the tip half and cut it down about 8 inches on the end where it couples , reducing the diameter so it slides all the way in. goop it up and slide it in........that's what she said.

dfroggy54 05-17-2010 09:33 AM

lol


All times are GMT -8. The time now is 10:35 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
© 2002 Big Water's Edge. All rights reserved.