Kayak Fishing Adventures on Big Water’s Edge

Kayak Fishing Adventures on Big Water’s Edge (http://www.bigwatersedge.com/bwevb/index.php)

- General Kayak Fishing Discussion (http://www.bigwatersedge.com/bwevb/forumdisplay.php?f=11)

- - Small hole by rudder screws (http://www.bigwatersedge.com/bwevb/showthread.php?t=9965)

wiredantz

04-12-2011 04:09 PM

Small hole by rudder screws

So now i have a small hole by the rudder screw on my blue x-factor, don't ask me how because i don't know.

I put some marine glue there should I take it to be welded? I put a bright light inside the stern and you could not see the hole, but i could blow air into it. After i put marine glue i could not blow air into it.

http://i172.photobucket.com/albums/w...factorhole.jpg

bus kid

04-12-2011 06:37 PM

Quote:

Originally Posted by wiredantz (Post 81078)

So now i have a small hole by the rudder screw on my blue x-factor, don't ask me how because i don't know.

thats a strange shade of blue. maybe layoff the:sifone:

a little goop, epoxy, ca glue, marine glue etc should do you.

Lets_Fish

04-12-2011 08:16 PM

Why not plastic weld the hole? Andy @ OEX can do it if you are not comfortable doing it.

wiredantz

04-12-2011 08:29 PM

Quote:

Originally Posted by bus kid (Post 81113)

thats a strange shade of blue. maybe layoff the:sifone:

a little goop, epoxy, ca glue, marine glue etc should do you.

Lol i didn't feel like going to the garage and taking a picture of it so i found a picture online. :P

All times are GMT -8. The time now is 01:55 PM.