Originally Posted by Drake

After being completely fed up with the promar bait cages, I've decided to build my own.

Things I hate about the promar cages.
- The hooks to keep the doors on break after a while
- They make stacking the hoops a pain
- When bugs are thick, it's too easy for them to clear all your bait.
- They get stepped on and bend
- They're annoying to store
- Chunked bait falls right out
- Needs some sort of fastener

After seeing my friend do REALLY well on bait tubes, I got to thinking. What can I do to improve.


Here's what I've come up with.
These hold about 3-5 sardines broken in half. They lasted all night still packed with bait. Didn't need to do 1 bait change

Pros
- Cost 1/2 as much as a promar to make
- They slip right into the bait pocket in the bottom of almost all hoops
- Almost every hardware store carries them
- They are solid plastic/pvc, means no rust and nothing to break
- Smaller slits makes bait last a lot longer
- Requires no fasteners
- Makes stacking hoops much cleaner and easier on the back of a kayak
- You can fit all 5 in a 1 gallon freezer bag already loaded with bait for the next trip
- Easy to clean out and store
- They float, incase one comes loose
- Bugs can't eat them from the outside (ambush/ecplipse users), they need to get in the hoop
- SEAL PROOF

I know the biggest question everyone is thinking to themselves.... DO THEY WORK??
Well tonight, I put them to the test. See photos






.
.
.
.
.
.
.
.
.
.
.
.

Originally Posted by Drake

Made a small modification to the nets to better accommodate the pucks.

One came loose last night so I wanted to come up with a better way to secure them. This is what I came up with.

I cut the string that holds the tag ends of the netting together which forms the opening. Then I weaved a short bungee in the loops and zip tied them to the lower ring. I cut the end off so they wouldn't rust and get hung up, then burned the tips to clean them up.

The bungees cost $2.94 from home depot.

Took about 2 minutes for each hoop.