|
I recently installed my transducer and did it with a Gladware plastic container. I did cut the botom of the container, siliconed it to the bottom of the kayak so that it would align with the transducer when lowered (it is mounted on the sail mast, Hobie Adventure). I made a hole on the lid and put together the transducer mount and the lid so the lid is "trapped" along with the transducer. Also made a few drilled (very small draining) holes on the edges of the lid. I put water before launching. When I store my kayak, it drains inside and I sponge it out at home.
|