Quote:
Originally Posted by Rob929
For you guys running 12 volts, if you want an easy option to control the volts going to your pump, go to Fry's electronics. In the computer fan area you will find a "fan speed control". It costs about $6 and gives you the ability to adjust your voltage from 3vdc- 12vdc using your 12 volt battery (thus allowing you to adjust your pumps flow rate).
If you already have a 12 volt setup (battery/ chargers etc) this is a great way to be able to tone your flow down, and save your battery. Not to mention if your battery is running your FF, you can have this "fan speed control" only wired inline with your bait pump, and still run full voltage to your FF.
|
I have been wondering if something like this existed, thanks for the info Rob.
Although I have plenty of juice with my current battery set-up, I really want to ditch the timer switch and reduce the noise from the pump. This should accomplish both and an easy enough mod to at least give a shot. Thanks again!
