|
It's worth a shot... It works fine on the revo, strapping the transom bracket to the mast with zip ties (ducer must be faced backwards though as it doesn't fit between drive well and mast). I do believe this is the low spot on both models. If it doesn't work or you need too much water for it to work right, you can easily add a foam well around it. On the revo about 2 cups of water does the trick, with no loss of signal with pitching/rolling movement.
As for settings, its pretty subjective as to what works best, but I was able to start with the default and try adjusting everything, and within 2-3 trips out I had a good handle on it and was able to get it working great. I don't use any auto modes, and manually adjust sensitivity and colorline each time out, sometimes adjusting throughout the day (diff settings for each freq). When I first tried the 'modes' I believe it was shallow water that worked best. All these modes do is adjust the settings, but its good to go through them while you are out and see how they look compared to each other, paying attention to the settings used. Hope that helps a bit at least until you get some better advice from those who have more experience with it. Good luck!
|