|
There have been lots of posts on this subject over the years. Use the search feature and you may not have to reinvent the wheel.
One of the commonly used solutions is a waterproof plastic box that you can get from Wal-mart for about $8. Drill a hole in the box for the wires and seal it with goop. Install a quick release plug to the wires from the box and also to the internal wiring for the FF and/or tank. Strap the box to some place in your kayak, (it could be on your crate). Plug the wires together and you are good to go.
To make life easier at home, get another set of quick release plugs for your charger. I use two wire trailer light plugs. A fancier solution is the waterproof plug used on the Hobie bait tank which probably works better but costs four times as much.
Bob
|