Trouble With Transducer - Kayak Fishing Adventures on Big Water’s Edge

kobra · 06-12-2011, 11:28 AM

If you decide to mount with goop again, get the foam with the tranny cut out and goop it down. After that has cured, before gooping the tranny, place the tube of goop in a pot of hot water for a little bit. Doing this makes the goop flow better so you don't end up with all the little bubbles. Not having bubbles is very important as they have a negative effect on the sonar signals.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

06-12-2011, 11:28 AM	#13
kobra Senior Member Join Date: May 2005 Location: oceanside Posts: 880	If you decide to mount with goop again, get the foam with the tranny cut out and goop it down. After that has cured, before gooping the tranny, place the tube of goop in a pot of hot water for a little bit. Doing this makes the goop flow better so you don't end up with all the little bubbles. Not having bubbles is very important as they have a negative effect on the sonar signals.