Tweaking Scotty Rod Holders - Kayak Fishing Adventures on Big Water’s Edge

MWC359 · 04-03-2012, 08:08 PM

Here are some photos of the modified holder. I used white pvc for the photos.

Unmodified holder with a freshwater rod exitting out the bottum and past the seat
0403121951.jpg

As an example white pvc tube was used for pictures. A small set screw was used to secure tube in holder.
0403121952.jpg

Rod set in holder. The pvc was set deep enough for the reel to go below lock collar
0403121953.jpg

Salt water rig clears seat by approx one inch close to horizontal
0403121957.jpg

0403121957a.jpg

04-03-2012, 08:08 PM	#13
MWC359 Member Join Date: Jan 2012 Location: Corona Ca. Posts: 58	Here are some photos of the modified holder. I used white pvc for the photos. Unmodified holder with a freshwater rod exitting out the bottum and past the seat 0403121951.jpg As an example white pvc tube was used for pictures. A small set screw was used to secure tube in holder. 0403121952.jpg Rod set in holder. The pvc was set deep enough for the reel to go below lock collar 0403121953.jpg Salt water rig clears seat by approx one inch close to horizontal 0403121957.jpg 0403121957a.jpg