Share Your Innovations - Kayak Fishing Adventures on Big Water’s Edge

Firefly51 · 02-10-2014, 07:50 AM

This example is made from .!05" Weed-Whacker line. I use these to secure all my gear and they work great. They extend to about 4' so they are plenty long enough for paddle, rods, and other gear.
First, I wrap the line tightly around a 1/2" x 9" wooden dowel with holes drilled about 1/4" from each end. The holes must be just large enough to pass the ends of the line through. I leave about 6" - 8" of line sticking through each hole. Place the line wrapped dowel on a pan of boiling water for 10 minutes, remove and place it in the freezer for another 10 minutes. Remove the dowel and the line has now become permanently coiled with two straight ends. Make loops on the ends of the lines with the little compression ferrules as shown. You can add clips, snaps, hook and loop tape, whatever.

02-10-2014, 07:50 AM	#11
Firefly51 Junior Join Date: Feb 2014 Location: SW Oregon Posts: 2	Equipment leashes This example is made from .!05" Weed-Whacker line. I use these to secure all my gear and they work great. They extend to about 4' so they are plenty long enough for paddle, rods, and other gear. First, I wrap the line tightly around a 1/2" x 9" wooden dowel with holes drilled about 1/4" from each end. The holes must be just large enough to pass the ends of the line through. I leave about 6" - 8" of line sticking through each hole. Place the line wrapped dowel on a pan of boiling water for 10 minutes, remove and place it in the freezer for another 10 minutes. Remove the dowel and the line has now become permanently coiled with two straight ends. Make loops on the ends of the lines with the little compression ferrules as shown. You can add clips, snaps, hook and loop tape, whatever. Last edited by Firefly51; 02-10-2014 at 07:55 AM. Reason: Photo