Bait tank help

[forefrazier]

Keep it simple:

Parts:

• 3.5 gallon bucket
• Rule 360 Bilge Pump
• 3/4" clear tubing (long enough to reach from the bucket just under the water line of your yak.
• 3/4" connectors (elbow for inside bucket, female to slip from elbow to tubing and pump
• 6 volt battery stored in dry bag
• tie straps

Labor:

• Cut center out of bucket lid so no trying to remove lid while on yak.
• Drill multiple 1/4" holes in top sides of bucket near scuppers for water drainage.
• Drill 3/4 hole near bottom of bucket for water entry and push connectors through attaching hose to bilge pump.

Easy....you can make on in about a half hour once you have the stuff. If you have a crate you use already, just through the whole thing in there and bungy it down.

-Steve