Lowrance Mark 4

[Yakin]

Originally Posted by Jimmyz123

I look at it this way, you are paying $100 more for color, do you really think the fish are going to bite better because of a color fish finder? Nope. That's why I chose the BW. I almost ended up with the HB 385ci but there was a mixup and so I chose to go with the one I got. I can't wait to test it out. Looks like that may be on the OEX tourney. I'll read up on the manual before I get out there.

Good luck on the Tourney!!
I wont be getting my line wet for another 3 weeks at least
Hey I'm taking my scotty mount off my wife's mini x to put it on my PA
any safe ideas for removing the pop rivets?

[Jimmyz123]

Originally Posted by Yakin

Good luck on the Tourney!!
I wont be getting my line wet for another 3 weeks at least
Hey I'm taking my scotty mount off my wife's mini x to put it on my PA
any safe ideas for removing the pop rivets?

You can always use a small drill bit to drill the rivet part. If you have access to the underneath part you can try cutting them off with a small set of bolt cutters or wire snips.

[Yakin]

Originally Posted by Jimmyz123

You can always use a small drill bit to drill the rivet part. If you have access to the underneath part you can try cutting them off with a small set of bolt cutters or wire snips.

Well I will try the drill bit first see where that takes me

[Iceman]

any safe ideas for removing the pop rivets?

center punch, then break off the heads and punch through.



work it back and forth until it breaks off, if you are looking to fill the holes left, you can use rivets for that.