Kayak Fishing Adventures on Big Water’s Edge  

Go Back   Kayak Fishing Adventures on Big Water’s Edge > Kayak Fishing Forum - Message Board > General Kayak Fishing Discussion

Reply
 
Thread Tools Display Modes
Old 04-05-2008, 05:36 AM   #1
keljad
Member
 
keljad's Avatar
 
Join Date: Dec 2007
Location: Australia
Posts: 39
good idea mate. I will use that if the holes dont match up. I notice in your photo that you have some type of plug that keeps the hole water tight where your leads enter your kayak. Is that something you made, or is it something that can be purchased? If so, what is it called? I am currently using a 1" rubber grommet for mine, but it doesnt work very well.

Thanks for your help
__________________
Regards,

James

keljad is offline   Reply With Quote
Old 04-05-2008, 08:15 AM   #2
Jim Sammons LJKF
Senior Member
 
Join Date: Mar 2005
Location: San Diego CA
Posts: 947
Besides the Piranha series the bases for the humminbirds are all the same up through the 700 series and including the Matrix. The mount changes in the 900 series. With the the others you can take any head unit and slap it on any base.
__________________
Jim Sammons
La Jolla Kayak Fishing
The Kayak Fishing Show
JimSammons.com
Jim Sammons LJKF is offline   Reply With Quote
Old 04-05-2008, 11:07 AM   #3
PerryC
Junior Member
 
Join Date: Jan 2007
Location: Orange County
Posts: 13
Thumbs up Wire seal

James,
It is a purchased wire seal sold under the name of Ancor. You can use them on fish finder installations, bait tanks and general wiring on kayaks. They usually come with three different inserts that compresses around the wire(s), so you can also use them for a single piece of 14awg wire for running power etc. They are available here at www.kayakfishingsupplies.com , and the individual page link is http://www.kayakfishingsupplies.com/...re-Seal/Detail

Here's a photo of the ones I used to carry showing two sizes of inserts towards the right of the black plastic pieces. The top and middle inserts are the same (the top one is used), and the largest insert is below those two. Not shown is the insert that can act as a plug, or that you can run a single wire through if you want.



Hope this helps,
PerryC.
__________________
Visit us online at All KayakFishing.
PerryC is offline   Reply With Quote
Old 04-05-2008, 11:17 AM   #4
dgax65
Guerro Grande
 
dgax65's Avatar
 
Join Date: Jan 2006
Location: Houston, TX
Posts: 629
James
They have those watertight cable outlets and cable clams at Whitworth's.

Watertight Cable Outlet These are used to pass un-terminated cables and cables with small connectors.

Cable Clam These are used for cables with larger connectors.

You might try using Selly's All-Clear to fill the gaps between the cable and the grommet. It doesn't look pretty, but it does the job.
__________________
Douglas Gaxiola
Team No Fish- Amateur Staff
dgax65 is offline   Reply With Quote
Old 04-05-2008, 03:14 PM   #5
keljad
Member
 
keljad's Avatar
 
Join Date: Dec 2007
Location: Australia
Posts: 39
Thanks again everyone for your help. I will definatley order one of these mounts. The RAM brand seems to have a very good name, I wish someone would sell them over here. Then again, everything is cheaper to buy over there and get it sent over anyway

I will place the order next month, and once arrived, I will place up some more pictures. I am heading down the goldcoast nest weekend to chase som flathead and bream, so I should have some more fishy photo's next week for you.

Thanks again for the help
__________________
Regards,

James

keljad is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -8. The time now is 02:59 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
© 2002 Big Water's Edge. All rights reserved.