Tips for trolling artificials?

[Murray]

Thought I would post this as it took me quite awhile to eliminate squeaky mirage drive and that others may be experiencing the same problem. After several 7 hr trips the squeak was pretty much driving me crazy. I have an old v1 drive so it was time to update with turbo fins. Worked out great. Had a chain break so put on all new chains figuring the others were probably going to fail sooner than later. Can not remember when the squeak actually began, but not too much longer after upgrades. Had the drums replaced as it appeared they had worn and were hitting the idler pulley. Next trip went well but then it came back. Finally disassembled the entire drive and serviced it. Noticed that one of the chains was a bit sticky so loosened and lubed. Cause may have been chain or that entire unit needed to be serviced. Also added nylon washers to protect drums from wearing on spine. Not that big a deal to service and it sure makes drive silky smooth and easier to pedal. Also good to know how it works in case you need to make on the water adjustments or repairs. Will be taking drive out of yak and securing before launching and landings to keep sand out in the future. Good luck and happy pedaling.