brazing rings

[Lets_Fish]

Check this link for all good info on brazing:
http://www.bigwatersedge.com/bwevb/s...hlight=brazing

[bus kid]

[QUOTE=Lets_Fish;104960]Check this link for all good info on brazing:
[URL]

Thanks for the link. Thanks wade for the tips going to get some silver solder tomorrow. Thanks for all the PM's still waiting for the one from the guy with a tig welder.As for all the jigs monday they are going to get bead blasted to remove all the old paint then I will start repainting them next weekend.

[Billy V]

Before you go out and buy any brazing equipment you might consider this....

Squidco does "in house" jig brazing every Tuesday. They do an excellent job and the turn around is fast. They a solder with a high silver content.
It's inexpensive - about $2. I believe.

New hooks are an additional cost. I recommend the Owner Stinger - 66 Trebles.

[bus kid]

Originally Posted by Billy V

Before you go out and buy any brazing equipment you might consider this....

Squidco does "in house" jig brazing every Tuesday. They do an excellent job and the turn around is fast.

It's inexpensive - about $2.

New hooks are an additional cost. I recommend the Owner Stinger - 66 Trebles.

Squidco is kind of a far drive for me. I got a neighbor that works in A/C and another thats a Millwright, and a welder at work, got the silver solder but forgot to get map gas, maybe next week.

[PescadorPete]

I use this:

http://www.google.com/products/catal...ed=0CEoQ8wIwAg#

and this:

http://www.homedepot.com/h_d1/N-5yc1...atalogId=10053

It takes a little practice to get the right amount of heat.