![]() |
|
Home | Forum | Online Store | Information | LJ Webcam | Gallery | Register | FAQ | Community | Calendar | Today's Posts | Search |
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Senior Member
Join Date: May 2009
Posts: 478
|
Last time I was at Cerritos there was DOH pounding surf that was humiliating on a surfboard, not to mention a kayak. Imagine launching at Blacks when the Aleutian Juice is in the water...
Also, the flies were thick! |
![]() |
![]() |
![]() |
#2 |
Junior
Join Date: May 2006
Posts: 10
|
Grassy Ass
![]() Thanks, and feel free to post anything else you feel helpful (wire leader for sierra is something I wouldn't have done, as I shore fished with a buddies rig one time (for about 15 minutes) down there and he had tied a Kroc onto his main line...so maybe he didn't know either. Good stuff. |
![]() |
![]() |
![]() |
#3 | |
.......
Join Date: Jan 2009
Posts: 1,509
|
Quote:
Like I said a lot of mackerel around. Sierra Mackerel are small toothy mackerel. They are fun to catch on light tackle and actually fair eating, but they usually don't run very big. If your going to target them all you need is a six inch bite leader of 30lbs "steelon" Nylon coated braided wire,a and maybe 10 to 15lbs spinning gear. A decent Sierra on ten pound is just a blast, they can really haul ass. You can buy bite leaders premade at places like Charkbait, but I make my own with a small lock snap at one end and I just splice in the other end. Spliced directly to my mainline with a Albright knot. Here's the bad news. If you use a bite leader you will get bit less, but you will loose less gear. Less is more you want your leader to be as inconspicuous as possible. The thing that I hate about Sierra is they will hit anything shiny. Don't use an chrome snaps or swivels in your rigging if the are around because they will hit swivels and cut you off. Your friends no fool when fishing lures like that krock. Your far more likely to get bit without wire. I prefer Fluorocarbon leader, fifty sixty or even eighty over wire, but if they are thick and your loosing gear to cutoffs it's nice to have wire. Personally I'd much rather target bigger fish like Roosters, Jack Crevalle, , Amberjack, Pargo, Broomtails, Leapord grouper, even yellows etc... over Sierra. Lots of options down there, it all depends what you want to fish for. Jim |
|
![]() |
![]() |
![]() |
#4 |
Junior
Join Date: May 2006
Posts: 10
|
good stuff, Jim. Thats exactly what I'm looking for. Like in LJ, I'll likely target bigger fish, work them hard, then start looking for taco meat as a last resort. Sounds like making bait is best if possible, then fishing structure with shiny iron/squid strip for the grouper/snapper/pargo, fly lining a squid for yellows/roosters, as well as Rapala/Yozuri maybe one deep diver (15ft) and one on top (5ft). I heard maybe even a Carolina rig off the bottom with a long leader, and depending on current, maybe even back bouncing like Ive done up in AK for Hbuts. Bro, I got fish wood right now...gonna be fun. Just hope temp, current, wind and surf cooperate.
|
![]() |
![]() |
![]() |
Tags |
baja todos santo tackle |
|
|