![]() |
|
Home | Forum | Online Store | Information | LJ Webcam | Gallery | Register | FAQ | Community | Calendar | Today's Posts | Search |
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 | |
Senior Member
Join Date: Mar 2010
Location: Santee
Posts: 904
|
Quote:
I tried to minimize how far it sticks out, but it still does about 1/3" or so. Seems ok when dragging across the sand since the bow is lifted up, and when resting on the sand the shape of the hull prevents any pressure up against the transducer. |
|
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: Jun 2010
Location: Alhambra
Posts: 506
|
inova microlight LED Wand
it is starting to get to that time of year where lots of us go out fishing late at night or o'dark early morning. trying to keep myself safe and more visible i thought that i would add a flag to my ride.
i went to home depot and found a fiberglass stick about 5/16 in size, that had a reflector attached to the top, it's about three feet in length. i think the original use for this was to line them along your drive way so that it would help illuminate the path for you. so i added some reflective tape to the pole and also added a flag, (thanks george for that vitamin water bag). the next thing i wanted to do is illuminate the pole using some type of light. went to bass pro shop, but i am sure other stores have this type of light. (just wanted to use my gift cert that i got for my birthday.) roamed around the store looking at all the different type of lights that were available. finally found this LED Wand. i liked it because it is waterproof and also submersible. also the light is able to be used with a high beam, low beam and also strobe setting. i was a bit concerned that the light would turn itself off after 30 mins like that other types of wand lights out there but it has not so far. what i did to attach this to my flag pole was to use some clips that i had gotten when i had purchased a light rope. the light rope for those who aren't familiar are the outdoor lights that you can buy at the home gardening section at your local target or walmart stores. i am not sure if they come with all the light ropes. the one that i had gotten was designed to hang from the outdoor umbrella so that's why it had these clips. i attached the clips to the wand and used goop to glue it. after that just snapped the other side to the flag pole and it worked perfectly. i may add a clip to the wand and then to the pole just in case it gets knocked off. hope that this is informative and useful to others. keep safe out there and good hunting. ![]() ![]() |
![]() |
![]() |
![]() |
#3 |
Senior Member
Join Date: Jun 2010
Location: Under a bridge
Posts: 2,169
|
Nice Tim.
Now you just have to go fishing! Those little clips deteriorate very quickly in sun exposure and become brittle after a season or two, I had some in my back yard. See out there this weekend. |
![]() |
![]() |
![]() |
#4 |
Senior Member
Join Date: Jun 2010
Location: Alhambra
Posts: 506
|
thanks matt. but for me i probably won't have the problem of brittle clips. i really don't get out very often and when i do, i would not be bring this out with me unless it is a night or early morning launch. so with that it should be okay regards to the uv rays.
Last edited by tagyak; 04-24-2012 at 03:38 PM. |
![]() |
![]() |
![]() |
#5 |
Junior
Join Date: Mar 2012
Posts: 28
|
portable fish finder
I am working on this right now. I could not upload the image but here is the web link.
I made this portable fish finder to be mounted on and Scotty base as soon as I figure out how to make the folding arms for the transducer I will post more pictures. I have it running on a 12v 7 amp hour battery. The unit turns on and runs have not tested it the ocean yet. I will this sat in NPH. http://img851.imageshack.us/i/imagebdp.jpg/ Papa drew |
![]() |
![]() |
![]() |
#6 |
Senior Member
Join Date: Apr 2010
Posts: 6,856
|
Bungee Cord/Leash keeper Thingy
![]() ![]() ![]()
__________________
![]() www.facebook.com/Teamsewer |
![]() |
![]() |
![]() |
#7 |
Senior Member
Join Date: Sep 2010
Location: South OC
Posts: 1,606
|
What to do with an old sherwood. . .
So i had a few of these sticks laying around. I bought the gaff hook at the jig stop in dana point. The gaff has a nail/point at the end of the shaft to "hammer into" in this case the stick. So a couple of whacks to drive the point into the wood. . . it doesn't slide up and down. Added the rope wrap, sideways now strong. I suppose I can use a lacquer for added protection and maybe strength, but it's on solid.
All the chatter on the home-made "ghetto" gaff got me to thinking I needed more tests. Bring on the 50lb trash cans, this baby works and lasts. I've had is since 2009 when I started. I think it floats too which is why I still have it. ![]() |
![]() |
![]() |
![]() |
Tags |
kayak fishing inovations, kayak rigging ideas |
|
|