Hobie Outback question - Kayak Fishing Adventures on Big Water’s Edge

taggermike · 04-15-2013, 08:28 AM

You can't knock a free hobie, but there's no way an outback will be as stable as an x-factor. Maybe a few more trips in the hobie will help get you use to it. Like roadx said, the outback has good secondary stability so it will feel a bit wobbly but will reach a point where it fghts tipping further. I dont know what the temp of Lake Biwa is right now, but take the kayak out to waist deep water with out any gear and lean until you flip over. Seriouosly, learning the breakpoint of the secondary stability will give you confidence. And like the old comercial said, "no surprise is the best surprise". Nice trout and a beautifull ake too. Mike

jorluivil · 04-15-2013, 11:02 AM

Quote:

Originally Posted by taggermike

You can't knock a free hobie

I agree....there's nothing like $$FREE.99

I think the issue isn't with the Hobie itself, its just that you're used to being on something else. Take it out a few times, if you're not happy with it sell it and get something that you like.

philr21 · 04-15-2013, 02:28 PM

Thanks guys, great info! I had no idea about the secondary stability.

Love the ability to be able to kick. Once I get the new rudder, new lines installed for rudder, and new bungies done, fish finder installed, look out fish!

The Hobie handles, do you take apart the handle to install or do you have to unrivet the padeye and re-rivit to install?

jruiz · 04-15-2013, 02:57 PM

Quote:

Originally Posted by philr21

Thanks guys, great info! I had no idea about the secondary stability.

Love the ability to be able to kick. Once I get the new rudder, new lines installed for rudder, and new bungies done, fish finder installed, look out fish!

The Hobie handles, do you take apart the handle to install or do you have to unrivet the padeye and re-rivit to install?

The padeyes where the handle goes on are not rivetted on. They're metal and use phil screws. Looks like you're missing a paddle too. Might be the reason you have a broken rudder in the first place if you're pedaling on all your launches and landings.

philr21 · 04-15-2013, 04:40 PM

Quote:

Originally Posted by jruiz

The padeyes where the handle goes on are not rivetted on. They're metal and use phil screws. Looks like you're missing a paddle too. Might be the reason you have a broken rudder in the first place if you're pedaling on all your launches and landings.

Don't know why I didn't notice that? Thanks for the info.

Broke the rudder as the lines to raise and lower don't work right and need to be redone (have all new to install). Turned the kayak to launch and rudder got stuck in between two rocks. Didn't even know it was stuck till after it broke.

Duck tape in the truck saved the day... was able to tape it together and keep fishing.

Jfish36 · 04-15-2013, 09:24 PM

Philr21 I have the older model outback to. I putted my outback in my swimming pool and was trying very hard trying to tip it over but it was very hard. I was able to stand on the yak, sit sideway with both legs in the water, and learn how to get back into the yak with upside down. Like triggerman said put your yak in the water and try to tip it over so you can learn to far you can push the limit. Hope that help

philr21 · 04-16-2013, 02:11 AM

Thanks. I did the same, took the Malibu X-Factor to shallow water. Only when I sit on the side did it start to roll over.

Haven't had a chance to do same with the Hobie. Thanks all for the info, really helps.

04-15-2013, 09:24 PM	#6
Jfish36 Member Join Date: Jul 2012 Posts: 37	Very hard to tip it over Philr21 I have the older model outback to. I putted my outback in my swimming pool and was trying very hard trying to tip it over but it was very hard. I was able to stand on the yak, sit sideway with both legs in the water, and learn how to get back into the yak with upside down. Like triggerman said put your yak in the water and try to tip it over so you can learn to far you can push the limit. Hope that help

04-15-2013, 08:28 AM	#1
taggermike Senior Member Join Date: May 2007 Location: Chula Vista Posts: 1,589	You can't knock a free hobie, but there's no way an outback will be as stable as an x-factor. Maybe a few more trips in the hobie will help get you use to it. Like roadx said, the outback has good secondary stability so it will feel a bit wobbly but will reach a point where it fghts tipping further. I dont know what the temp of Lake Biwa is right now, but take the kayak out to waist deep water with out any gear and lean until you flip over. Seriouosly, learning the breakpoint of the secondary stability will give you confidence. And like the old comercial said, "no surprise is the best surprise". Nice trout and a beautifull ake too. Mike

04-15-2013, 02:28 PM	#3
philr21 Senior Member Join Date: Aug 2012 Location: Yokosuka, Japan Posts: 228	Thanks guys, great info! I had no idea about the secondary stability. Love the ability to be able to kick. Once I get the new rudder, new lines installed for rudder, and new bungies done, fish finder installed, look out fish! The Hobie handles, do you take apart the handle to install or do you have to unrivet the padeye and re-rivit to install?

04-16-2013, 02:11 AM	#7
philr21 Senior Member Join Date: Aug 2012 Location: Yokosuka, Japan Posts: 228	Thanks. I did the same, took the Malibu X-Factor to shallow water. Only when I sit on the side did it start to roll over. Haven't had a chance to do same with the Hobie. Thanks all for the info, really helps.