![]() |
|
![]() |
#1 |
Senior Member
Join Date: Mar 2005
Location: Richland Oregon
Posts: 1,547
|
JT, I didnt notice, Do you have a Hitch Receiver?
|
![]() |
![]() |
![]() |
#2 |
Member
Join Date: Feb 2008
Location: North County Inland
Posts: 76
|
|
![]() |
![]() |
![]() |
#3 |
Guerro Grande
Join Date: Jan 2006
Location: Houston, TX
Posts: 629
|
You should be fine as long as the kayak is strapped in properly. I used a four-point strap set-up that kept my kayak from moving front-back or side to side. Just don't leave it hanging out over the edge if it gets really hot. It doesn't take long to develop a flat spot on the hull.
I carried my Drifter in the bed of my Ranger for 4 years with only one incident. I got rear-ended (almost) when coming back from Mission Bay. The car came to a stop just as it barely tapped my bumper. I had no damage to my truck or kayak, but the rudder pin left a 12" gouge in the car's hood. Even though there was no damage, this was the main factor in my decision to get the rack. Thule and Yakima both make nice racks. I use a Thule Xsporter with a home-made kayak rack. ![]() You can find racks at REI Rack-It Track-Racks The Rack Warehouse I've also seen racks listed on Craig's List and on some of the kayak fishing message boards.
__________________
Douglas Gaxiola |
![]() |
![]() |
![]() |
#4 |
Member
Join Date: Feb 2008
Location: North County Inland
Posts: 76
|
Thanks...Thats something i will look into when i get some more funds. I still have to get something to wear so feet stay warm/dry, and a cart so i dont jack up the boat while going to the water.
|
![]() |
![]() |
![]() |
#5 |
Member
Join Date: Oct 2006
Location: Carlsbad
Posts: 48
|
I have the same racks but my yak rubs the cab a bit. I noticed on your picture that you have something between the rack and your Prowler. What is that? (looks like a great idea)
|
![]() |
![]() |
![]() |
#6 | |
Senior Member
|
Quote:
![]() |
|
![]() |
![]() |
![]() |
#7 |
Senior Member
Join Date: May 2006
Posts: 698
|
I use this hitch mounted tail gate extender. 15' yak in 5' bed. $35 at Harbor Freight.
|
![]() |
![]() |
![]() |
#8 |
Member
Join Date: Feb 2008
Location: North County Inland
Posts: 76
|
Yeah but I dont have the hitch receiver at this point. How much does it cost to get one installed? Ive only used my bumper ball.
|
![]() |
![]() |
![]() |
#9 |
Senior Member
Join Date: Aug 2007
Location: south park (san diego),CA
Posts: 119
|
|
![]() |
![]() |
![]() |
#10 |
Senior Member
Join Date: May 2006
Posts: 698
|
|
![]() |
![]() |
![]() |
|
|