Has anyound installed a Humminbird HDSI transducer? - Kayak Fishing Adventures on Big Water’s Edge

TJones · 03-24-2015, 05:01 PM

Same transducer . What I would recommend is checking out the deployable arm from ram . You can see videos on you tube if you google LSS 2 on pro angler . Ram makes a mount that Can clamp to back handle of PA . This will put the transducer in water below the hull line of kayak . The only negative of this type of mount , Is that it creates drag . Also debris such as kelp could get hung on to it . Great unit , but not really suited for kayaks . Of course PA is borderline of a small boat .

BrokeLoser · 03-24-2015, 07:05 PM

Quote:

Originally Posted by TJones

Same transducer . What I would recommend is checking out the deployable arm from ram . You can see videos on you tube if you google LSS 2 on pro angler . Ram makes a mount that Can clamp to back handle of PA . This will put the transducer in water below the hull line of kayak . The only negative of this type of mount , Is that it creates drag . Also debris such as kelp could get hung on to it . Great unit , but not really suited for kayaks . Of course PA is borderline of a small boat .

Man, I'm such an idiot. The other thread I thought I saw here I actually started here: http://www.hobiecat.com/forums/viewt...p?f=26&t=54051
There is guy there saying that the Si works while mounted as a shoot through...Did you ever try yours as a shoot through?
I'd really like to avoid mounting anything on the outside of the yak; if it won't work I'll just mount my Di ducer shoot through and use my 959 on the PA.

Thanks again

TJones · 03-24-2015, 08:48 PM

Wet , dry , you name . It has to be in water . Side imaging shoots a razor thin beam and it has to be free from any obstructions . I personally did not like hanging anything over kayak myself .That's when I glued it to bottom of revolution . There was a recessed spot on bottom that worked well. I had to be careful when loading and unloading kayak . It was not exactly level either , which is not recommended . At that point I had enough , and I grabbed a lowrance ready hobie . I have been using lowrance since then , and have not looked back . That unit is B A though. Blows away any of the seven or five series units. Good luck .

TJones · 03-24-2015, 08:52 PM

Quote:

Originally Posted by BrokeLoser

Man, I'm such an idiot. The other thread I thought I saw here I actually started here: http://www.hobiecat.com/forums/viewt...p?f=26&t=54051
There is guy there saying that the Si works while mounted as a shoot through...Did you ever try yours as a shoot through?
I'd really like to avoid mounting anything on the outside of the yak; if it won't work I'll just mount my Di ducer shoot through and use my 959 on the PA.

Thanks again

Of someone saying they did a shoot through and everything worked great . What a load of b.s. .

fishingfiend · 03-25-2015, 08:15 AM

I'm with TJones, I also call BS that it worked through the hull. I did a lot of testing before settling on this setup. The transducer needs be almost fully exposed to work properly.

03-24-2015, 05:01 PM	#1
TJones Senior Member Join Date: Jan 2012 Posts: 2,526	Update Same transducer . What I would recommend is checking out the deployable arm from ram . You can see videos on you tube if you google LSS 2 on pro angler . Ram makes a mount that Can clamp to back handle of PA . This will put the transducer in water below the hull line of kayak . The only negative of this type of mount , Is that it creates drag . Also debris such as kelp could get hung on to it . Great unit , but not really suited for kayaks . Of course PA is borderline of a small boat . Last edited by TJones; 03-24-2015 at 05:04 PM. Reason: Typo

03-24-2015, 08:48 PM	#3
TJones Senior Member Join Date: Jan 2012 Posts: 2,526	I tried it Wet , dry , you name . It has to be in water . Side imaging shoots a razor thin beam and it has to be free from any obstructions . I personally did not like hanging anything over kayak myself .That's when I glued it to bottom of revolution . There was a recessed spot on bottom that worked well. I had to be careful when loading and unloading kayak . It was not exactly level either , which is not recommended . At that point I had enough , and I grabbed a lowrance ready hobie . I have been using lowrance since then , and have not looked back . That unit is B A though. Blows away any of the seven or five series units. Good luck .

03-25-2015, 08:15 AM	#5
fishingfiend Senior Member Join Date: Feb 2012 Location: SoCal Posts: 196	I'm with TJones, I also call BS that it worked through the hull. I did a lot of testing before settling on this setup. The transducer needs be almost fully exposed to work properly.