Fish Finder Xducer - Kayak Fishing Adventures on Big Water’s Edge

Dan W. · 08-02-2008, 04:16 PM

After years of re-glueing the transducer because of bubbles or poor signal I was pretty fed up with that method. I tried the water system as mentioned above and I think I may not have to fix it for a long time. I used a slice of wide pool noodle and carved out the shape of the puck, cutting a groove on each side for air and water to escape, and glued it down to the yak. Just pour in an ounce of water and put the puck in. It fits snug and tight and no bubbles because of the grooves. Crytal clear signal and maintenance free.

bajadog · 08-04-2008, 04:09 AM

Quote:

Originally Posted by Dan W.

After years of re-glueing the transducer because of bubbles or poor signal I was pretty fed up with that method. I tried the water system as mentioned above and I think I may not have to fix it for a long time. I used a slice of wide pool noodle and carved out the shape of the puck, cutting a groove on each side for air and water to escape, and glued it down to the yak. Just pour in an ounce of water and put the puck in. It fits snug and tight and no bubbles because of the grooves. Crytal clear signal and maintenance free.

Thanks Dan.
Can you post a photo please?

deeberdave · 08-04-2008, 08:07 AM

I've been using the water/pool noodle setup for about six months, has
worked great for me also. Just add water and your in business!!!

Dan W. · 08-04-2008, 05:15 PM

bajadog · 08-05-2008, 04:23 AM

Thanks Dan.

Vikingj · 08-05-2008, 08:53 AM

Thanks all for the photo and details. I'm just in the process of hooking up a new ff and had never heard of the water pocket before.

Billy V · 08-05-2008, 09:59 AM

Just a quick question..........

What exactly does it look like if you were to get bubbles in the marine goop ??
or, is it more like you will miss fish signals ??

08-05-2008, 04:23 AM	#5
bajadog I eats what I kills Join Date: Apr 2008 Location: San Diego Posts: 393	Thanks Dan. __________________ Please release bill-fish.

08-02-2008, 04:16 PM	#1
Dan W. Member Join Date: Sep 2007 Location: South Park, San Diego Posts: 49	After years of re-glueing the transducer because of bubbles or poor signal I was pretty fed up with that method. I tried the water system as mentioned above and I think I may not have to fix it for a long time. I used a slice of wide pool noodle and carved out the shape of the puck, cutting a groove on each side for air and water to escape, and glued it down to the yak. Just pour in an ounce of water and put the puck in. It fits snug and tight and no bubbles because of the grooves. Crytal clear signal and maintenance free.

08-04-2008, 08:07 AM	#3
deeberdave Member Join Date: May 2008 Location: CARLSBAD Posts: 34	I've been using the water/pool noodle setup for about six months, has worked great for me also. Just add water and your in business!!!

08-04-2008, 05:15 PM	#4
Dan W. Member Join Date: Sep 2007 Location: South Park, San Diego Posts: 49

08-05-2008, 08:53 AM	#6
Vikingj Senior Member Join Date: Jul 2008 Location: Dana Point area Posts: 438	Thanks all for the photo and details. I'm just in the process of hooking up a new ff and had never heard of the water pocket before.

08-05-2008, 09:59 AM	#7
Billy V Senior Member Join Date: Sep 2006 Location: Bay Ho Posts: 1,382	Just a quick question.......... What exactly does it look like if you were to get bubbles in the marine goop ?? or, is it more like you will miss fish signals ??