The External Kayatank prototype brought to you from your friends at OEX - Kayak Fishing Adventures on Big Water’s Edge

Siebler · 10-23-2008, 10:18 AM

As Matt said, Art has had his external KayaTank deal for a Long time and as far as I know it has had no problems.

I have observed no breakdown of these tanks and I have had a few sitting in the sun for the past 3 years.

JrBasser · 10-24-2008, 11:54 AM

Actually, Matt, your tank was number 3 :-) I just havn't paddled the trident in months. Rockin the X-Factor for the bugs

JrBasser · 10-25-2008, 12:56 PM

My tank has been sitting out back for a few weeks and I noticed the vinyl glue on the outside of the tank yellowed pretty good. But I was pretty messy with it. I think I made CJ's tank a little neater and I also havn't noticed any major yellow stains on his. The tank is holding together pretty awesome though. And even if the sun exposed glue "comes apart", the inside of your tank is out of sunlight and will keep youor tank together and leak free. The cool thing is the tanks neatness is more important that its unleakability because if a corner drips a little bit, your a little safer than the internal version obviously.

JrBasser · 10-26-2008, 02:38 PM

Hey matt, the wiring looks really good on your boat, who did it?

Matt · 10-26-2008, 04:10 PM

Some slack jaw, hillbilly, teenager who has only ever caught one fish in LJ with a cute mom wired it for me

Nice job Brett, the tank hasn't had an issue yet!!

Siebler · 11-01-2008, 12:02 PM

Quote:

Originally Posted by Matt

Some slack jaw, hillbilly, teenager who has only ever caught one fish in LJ with a cute mom wired it for me

Nice job Brett, the tank hasn't had an issue yet!!

Just because of his post on my Classifieds post....

Id like to point out it wasn't even a real fish, it was a shark.

That is all

DESTROYER · 11-01-2008, 01:35 PM

Cj-That looks pretty sweet! Do you think that it is possible to do a through scupper hole intake to clean it up so that you don't have to hang it off the side? I'm getting my new trident soon and I might be interested in a set up like that. I really like the way Matt has his flushmounts, it makes the boat look really sleek!

moyer

10-23-2008, 10:18 AM	#1
Siebler Senior Member Join Date: Mar 2005 Location: Richland Oregon Posts: 1,547	As Matt said, Art has had his external KayaTank deal for a Long time and as far as I know it has had no problems. I have observed no breakdown of these tanks and I have had a few sitting in the sun for the past 3 years. __________________ CJ Siebler

10-26-2008, 04:10 PM	#5
Matt Support your local pangas Join Date: Feb 2007 Location: Lj Posts: 976	Some slack jaw, hillbilly, teenager who has only ever caught one fish in LJ with a cute mom wired it for me Nice job Brett, the tank hasn't had an issue yet!! __________________ Thanks Matt F. Last edited by Matt; 10-26-2008 at 04:52 PM.

10-24-2008, 11:54 AM	#2
JrBasser Senior Member Join Date: May 2006 Posts: 260	Actually, Matt, your tank was number 3 :-) I just havn't paddled the trident in months. Rockin the X-Factor for the bugs

10-25-2008, 12:56 PM	#3
JrBasser Senior Member Join Date: May 2006 Posts: 260	My tank has been sitting out back for a few weeks and I noticed the vinyl glue on the outside of the tank yellowed pretty good. But I was pretty messy with it. I think I made CJ's tank a little neater and I also havn't noticed any major yellow stains on his. The tank is holding together pretty awesome though. And even if the sun exposed glue "comes apart", the inside of your tank is out of sunlight and will keep youor tank together and leak free. The cool thing is the tanks neatness is more important that its unleakability because if a corner drips a little bit, your a little safer than the internal version obviously.

10-26-2008, 02:38 PM	#4
JrBasser Senior Member Join Date: May 2006 Posts: 260	Hey matt, the wiring looks really good on your boat, who did it?

11-01-2008, 01:35 PM	#7
DESTROYER Senior Member Join Date: Mar 2005 Location: "The Table" Posts: 976	Cj-That looks pretty sweet! Do you think that it is possible to do a through scupper hole intake to clean it up so that you don't have to hang it off the side? I'm getting my new trident soon and I might be interested in a set up like that. I really like the way Matt has his flushmounts, it makes the boat look really sleek! moyer