![]() |
|
Home | Forum | Online Store | Information | LJ Webcam | Gallery | Register | FAQ | Community | Calendar | Today's Posts | Search |
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Member
Join Date: Jul 2008
Location: Encinitas
Posts: 600
|
You may want to consider the benefit of having a rounded bait tank over a squared off tank as well. My tank (home made) is similar to the thresher, Ive found that the corners in the squared off tank dont keep sardines very well as they beat themselves to death wedging their noses into the corners ....
That being said ive never heard anyone swear at a bait tank more than josh ![]() |
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: Sep 2006
Location: Bay Ho
Posts: 1,382
|
You can add one more thing to the Hobie list.
The ON-Off switch is not sealed, and salt water can easily enter the switch. I have globbed grease on the switch shaft to try to prevent the salt water from entering. We will see how it holds up. A new switch is $10. ----------------------------- It does hold much more bait than the Thresher, and it will live happier if the water flow is not diminished too much from the clogging. The clogging starts as soon as the particles build up on the protective screen. -I am tempted to run the tank without the screen to test the volume of water flow, verses with the screen. --and to see if the pump still clogs as easily. --------------------------------------- I'm sure the water Volume is diminished with the screen. The problem I suspect is that if you run the tank without a protective screen, and it clogs, will not be able to see, or clear the actual pump impeller while on the water. -Even a strong back pressure from blowing water (or some other device) into the pump discharge may not dislodge a piece of debris. (But I do have an Idea) If you carry a short length of Clear Plastic tubing with you. You can slip it over the pump discharge and Blow pressure back through the pump. Air pressure, not water, but it still might work to clear a clog without having to remove the intake tube (pain in the as$). --I will try this the next time I use The Hobie tank. Feel free to test this proposed remedy for yourselves and please report your successes, or failures. If I had run the tank without the screen yesterday and had a clog it would have been disastrous as I was holding 25+ Greenbacks in a full tank that would have surely suffered from the loss of water flow. |
![]() |
![]() |
![]() |
|
|