Hobie Revo/wheels question - Kayak Fishing Adventures on Big Water’s Edge

SeaEagle_1 · 09-06-2010, 11:23 AM

well i am lazy and usually have gear that is unsecured on my deck. so what i do is just wade out into the water just far enough (about 18" or 2ft) and just slide them under the boat, line up the rods with the holes and and then bring the wheels down and seat the wheels in the scubbers. sometimes it can take a bit of effort to get those wheels down, but it lets me wheel my yak right out of the water.

mrJB · 09-06-2010, 04:41 PM

You can also open the rear hatch and get an extra gripping or lifting hold...

09-06-2010, 04:41 PM	#2
mrJB Senior Member Join Date: Feb 2007 Location: O.C. Posts: 352	You can also open the rear hatch and get an extra gripping or lifting hold... __________________ "I Brake for Halibut"

09-06-2010, 11:23 AM	#1
SeaEagle_1 Member Join Date: Feb 2009 Location: Santa Ana/But moving to Elsinore Posts: 32	well i am lazy and usually have gear that is unsecured on my deck. so what i do is just wade out into the water just far enough (about 18" or 2ft) and just slide them under the boat, line up the rods with the holes and and then bring the wheels down and seat the wheels in the scubbers. sometimes it can take a bit of effort to get those wheels down, but it lets me wheel my yak right out of the water.